Introduction
About LiveWire
Congratulations on your purchase of LiveWire™! LiveWire appliances uniquely combine flow-based reporting using deep packet inspection (DPI) with high-speed, packet capture and storage. LiveWire is designed to work with both LiveAction’s LiveNX and ThreatEye. Because LiveWire starts with packet data, it is able to provide a unique, and extended, set of flow-based monitoring data called LiveFlow. LiveFlow is extended IPFIX data and is exported to LiveNX and ThreatEye. See Sending Telemetry to LiveNX and ThreatEye for the additional tasks you must perform in order to export LiveFlow data from LiveWire to LiveNX and ThreatEye. Please also refer to the LiveNX and ThreatEye documentation for more information on using the LiveFlow data exported to LiveNX and ThreatEye.
LiveWire is available in the following configurations:
|
|
LiveWire Edge
|
LiveWire Core
|
LiveWire PowerCore
|
|---|---|---|---|
|
Chassis
|
Mini Network Appliance
|
1U
|
2U
|
|
Processor
Base Frequency Cores Thread |
Intel® Atom® C3758
2.2 GHz 8 |
AMD® 1x7313
3.0 GHz 16 32 |
AMD® 2x EPYC 73F3
3.5 GHz 12 24 |
|
Memory
|
16 GB
|
64 GB
|
256 GB
|
|
Expansion Slots
|
N/A
|
1 x 16 full-height PCI Express 3.0 slot
NOTE: A total of one capture adapter can be added to the LiveWire Core.
|
Eight available PCI Express 3.0 slots
NOTE: A total of three high speed capture adapters can be added to the LiveWire PowerCore.
|
|
Integrated Network Interfaces
|
• Mini-USB console port
• Management port
• Three Ethernet ports
• Two bridge ports
|
4 x 1GBASE-T
iDRAC |
4 x 1GBASE-T
iDRAC |
|
Storage-OS
|
Included as part of Storage-Data
|
Included as part of Storage-Data
|
Two 2 TB SSD SAS ISE drives for OS
|
|
Storage-Data
|
1 TB SSD
|
Available with 32 TB SAS ISE storage, RAID 0 with optional RAID 10
|
240 TB SAS storage, RAID 0 or optional RAID 6
NOTE: Optional external storage with LiveWire TeraVault — Up to 960 TB of additional storage (4x 2U TeraVaults)
|
|
Capture Adapter Options
(High performance network analysis cards) |
N/A
|
1G Capture Adapter (4-port)
NOTE: A total of one capture adapter can be added to the LiveWire Core.
|
1G Capture Adapter (4-port)
10G Capture Adapter (2- or 4-port) 40G Capture Adapter (2-port) 100G Capture Adapter (2-port) NOTE: A total of three capture adapters can be added to the LiveWire PowerCore.
|
|
Additional
|
|
|
PERC H840 Adapter (used only for storage subsystem)
|
NOTE: In this guide, references to ‘LiveWire’ refer to the complete collection of LiveWire configurations described in the table above. When necessary, references to a specific LiveWire configuration are specified to note any differences between configurations.